Sasha's work progression thread !!

[Sasha of PnP Glass]

Action shots of my friends Roor steamroller with a Inline AC I made for it. I love to make sure my work is functioning properly. Thanks to SP for the visit.
Enjoy !!
http://i289.photobucket.com/albums/ll205/puffnpass/rolleractionshotsforweb.jpg
Just before we started.
http://i289.photobucket.com/albums/ll205/puffnpass/rolleractionshotsforweb6.jpg
My wife makes the best damn cookies in the world !!!
http://i289.photobucket.com/albums/ll205/puffnpass/rolleractionshotsforweb5.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/rolleractionshotsforweb4.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/rolleractionshotsforweb3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/rolleractionshotsforweb2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/rolleractionshotsforweb8.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/rolleractionshotsforweb7.jpg
From my view. So smooth and yummy !!!
Thanks for looking !!!

[Sasha of PnP Glass]

Origonal shots of the roller and ac before they were delivered to the new owner.
Enjoy !!

http://i289.photobucket.com/albums/ll205/puffnpass/inlineacforweb.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/inlineac6forweb.jpg


http://i289.photobucket.com/albums/ll205/puffnpass/inlineac5forweb.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/inlineac4forweb.jpg[/URL]


http://i289.photobucket.com/albums/ll205/puffnpass/inlineac3forweb.jpg

Thanks for looking !!
[URL="http://i289.photobucket.com/albums/ll205/puffnpass/inlineacforweb.jpg"] (http://i289.photobucket.com/albums/ll205/puffnpass/inlineac4forweb.jpg)

[Bubbleman]

very nice glass man, and very nice photos. Great to see.

thanks for sharing


Bubble man

[Sasha of PnP Glass]

very nice glass man, and very nice photos. Great to see.

thanks for sharing


Bubble man

Thank you sir for the oppurtunity. Its an honor to be a member.
-Peace

[COOPAROO]

very nice. and from personal experience, i can say it rips like a dream.

+ i know that house and that couch haha. i actually might be moving in with them next year. next time you see them tell them coop says whats up

[Calp]

Jesus that looks amazing.. I love the custom length addition

[Sasha of PnP Glass]

Here is a 14mm push style slide cocked for easier viewing and a paddle. It was a cutom slide to match a 3pc AC I made for him.

-Peace

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/orangeandwhite14mmslideforweb2.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/orangeandwhite14mmslideforweb3.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/orangeandwhite14mmslideforweb5.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/orangeandwhite14mmslideforweb4.jpg

Thanks for looking !!!

[Sasha of PnP Glass]

This 18mm ice pinch slide is two sections with a clear window. It also has a matching paddle. This slide is the same design as the white ip slide I made for the Roor inline upgrade. This slide is sold.

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/SilverbeachIPslideforweb2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/SilverbeachIPslideforweb3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/SilverbeachIPslideforweb.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/SilverbeachIPslideforweb5.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/SilverbeachIPslideforweb6.jpg

Thanks for looking !!!

-Peace

[Sasha of PnP Glass]

Here is the Sashaor or Frakenroor as its been called. It came to me with the bottom beaker broken off. It now has a UST bi stable 14mm joint and white ice pinch slide by me.

http://i289.photobucket.com/albums/ll205/puffnpass/roor1.jpg This what it looked like when I got her. The orange stuff is Grunge off.
http://i289.photobucket.com/albums/ll205/puffnpass/RoorredoneintoinlinebySashaforweb.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/RoorredoneintoinlinebySashaforweb4.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/RoorredoneintoinlinebySashaforweb2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/RoorredoneintoinlinebySashaforweb5.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/RoorredoneintoinlinebySashaforweb6.jpg

Thanks for looking !

[Sasha of PnP Glass]

Some action shots and pieces in progress.
Enjoy!

http://i289.photobucket.com/albums/ll205/puffnpass/actionshotforweb092.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/actionshotforweb09.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/actionshotforweb093.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/actionshotforweb094.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/actionshotforweb095.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/inlinebysashaonaRoorforweb.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/inprogressinlines.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/inprogressforweb.jpg

Thanks again for looking !!!

[Sasha of PnP Glass]

Here is a liad back inline I just sold with some milk shots of her and the proud new owner.
Enjoy!

http://i289.photobucket.com/albums/ll205/puffnpass/laidbackinlineforweb.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/laidbackinlineforweb2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/laidbackinlineforweb6.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/laidbackinlineforweb7.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/laidbackinlineforweb8.jpg
Milk !!
http://i289.photobucket.com/albums/ll205/puffnpass/33kulpx.jpg This is the inline I made with a KC ac on it.

[Sasha of PnP Glass]

Teal and red 18mm push style slide with paddle.
Enjoy !

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/Tealandredpushstyle18mmforweb2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/Tealandredpushstyle18mmforweb4.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/Tealandredpushstyle18mmforweb5.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/Tealandredpushstyle18mmforweb6.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/Tealandredpushstyle18mmforweb.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/Tealandredpushstyle18mmforweb3.jpg

Thanks for looking !

[Sasha of PnP Glass]

Two new 18mm push style slides. The rasta colored slide is two sections and is cocked at a 45 for easy viewing. The multi colored slide is also two sections. It has a matching paddle/marble. These are both available on sellyourglass.com under Sasha Glass.
Enjoy !!

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmRastacockedpushstyleslidefor-4.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmRastacockedpushstyleslidefor-3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmRastacockedpushstyleslidefor-2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmRastacockedpushstyleslidefor-1.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/rainbowpushstyleslidewithmarbleforw.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/rainbowpushstyleslidewithmarblef-3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/rainbowpushstyleslidewithmarblef-4.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/rainbowpushstyleslidewithmarblef-1.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/rainbowpushstyleslidewithmarblef-2.jpg

Thanks for looking !!

[Sasha of PnP Glass]

Here is a 18mm swat style slide with silver, gold fume, and a little amber purple. This is a personal one shot at a time kinda slide. Hakko or hot rod for sure.
Enjoy!

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/fumedslidewithspike18mmforweb4.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/fumedslidewithspike18mmforweb.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/fumedslidewithspike18mmforweb2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/fumedslidewithspike18mmforweb3.jpg

Thanks for looking !!

[Sasha of PnP Glass]

5 Hole diffused inline bubbler with 14mm gog slide. This piece is 11 1/2" Long, 6 1/2" wide, and 10" tall. Weight 23 oz. This piece has sold.

http://i289.photobucket.com/albums/ll205/puffnpass/Available%20Glass/tealandmysinlineforwebc2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/tealandmysinlineforweb.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/tealandmysinlineforwebdetail.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/tealandmysinlinecloseupofholesforwe.jpg
-----------------------------------------------------------
7 Hole diffused inline bubbler with 18mm slide. It is 10 1/2" tall by 6 3/4" wide. Weight 18.8 oz. Available !!

http://i289.photobucket.com/albums/ll205/puffnpass/Available%20Glass/apinlineforweb.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/apinlineforweb3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/apinlineforweb4.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/apinlinefromthebottomforweb.jpg
----------------------------------------------------------
Six hole diffused mini inline tube. This inline has a carb not a pull slide. 9" Tall and 5" wide. This piece has sold.

http://i289.photobucket.com/albums/ll205/puffnpass/sixholediffusedinlinetubeforweb2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/sixholediffusedinlinetubeforwebclos.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/sixholediffusedinlinetubeforweb.jpg

Thanks for looking !!

[Sasha of PnP Glass]

18mm two section push style slide with a white paddle. Available on sellyourglass.com
Enjoy !

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmrainbowslidewithwhitepaddlef-1.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmrainbowslidewithwhitepaddleforw.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmrainbowslidewithwhitepaddlef-3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmrainbowslidewithwhitepaddlef-2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmrainbowslidewithwhitepaddlef-4.jpg

Thanks for looking !!

[Sasha of PnP Glass]

Some more action shots for ya.

http://i289.photobucket.com/albums/ll205/puffnpass/drawingintheflare.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/roundingtheflare.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/colapsingtheflare.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/blowingoutthetube.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/dryhammerinprocess2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/flareanddesk.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/pastelsectionforweb.jpg

Thanks for looking !!!

[toob]

sick work, and awsome pics thanks for sharin

[Sasha of PnP Glass]

Here is a sick little 14mm swat style push slide. Sorry for the crappy pic. As soon as it was done he wanted it. I did not have time to take good pics of it.
Enjoy !

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/lavaslideforemail.jpg

Thanks for looking !!!

[Sasha of PnP Glass]

Here is a little girly dry pipe I did back in 08' I forgot to post. The owner was in love with the pastel colors. She guards it like its gold.

http://i289.photobucket.com/albums/ll205/puffnpass/pastelsidecarforweb.jpg

Thanks for looking !!

[greenmonster420]

Absolutely gorgeous. I love what you did with that broken beaker. That's a hell of a tube.

[DaNK]

Sasha- I have a tube I broke right at the joint. Where the joint meets the side of the beaker. I was wondering if you could work some of your badass magic on this one.




Send me an PM, and lets see what you can do.

[Sasha of PnP Glass]

New 18mm two section push style slide with half moon paddle and a lot of silver fume work. This one is deff. funky. The fume work started to almost form a texture to it. Crazy colors.
Enjoy !!
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmsilverfumedslidewithpadle4.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmsilverfumedslidewithpadle3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmsilverfumedslidewithpadle2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmsilverfumedslidewithpadle6.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmsilverfumedslidewithpadle5.jpg
Thanks for looking !!

[Sasha of PnP Glass]

Sorry for the delay in new work people. I have been out of commision for the last week. I have had a horribly infected tooth. I got a root canal yesterday and still recovering. I have to go back in ten days for the second round to make sure they got all the infection out. I will be back on the torch asap. Please stay tuned !!

-Peace

[Sasha of PnP Glass]

Quote: Originally Posted by Sublithic:

"Hi, I'm sublithic, and I'm a fumeaholic. I have no plans to enter recovery. In fact, let me share with you my latest binge, heavy doubles of Sasha in the glass.

I was served both these bad boys, the ice pinch slide and the silver-and-gold-fumed "swat style" pushie, at SYG, and at fantastic prices, even more considering the quality and beauty of these small but substantial works of (extremely functional) art.
Of course, pictures never do justice to glass art, but I have to say, both of these are much more beautiful than even these excellent pics suggest (I didn't take them, I swiped them from the SYG thread, but mine aren't ready for prime time).

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/fumedslidewithspike18mmforweb4.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/SilverbeachIPslideforweb2.jpg

But another thing pictures can't convey is craftsmanship and "heft." Both of these feel like they've got about a kilo of glass in each. In fact, if you needed to slug someone hard and didn't have a roll of coins handy, you could do worse than to tuck one of these big bad boys up in your fist. I'm not kidding -- they're solid.

The fumed pushie is now at the top of my DD rotation. I usually prefer Martinis, and teeny 'tini's at that, but this thing's got a perfect little hemispherical push, and the glass is so thick that it might as well be a 'tini. I'm dirtying it up good 'n proper to get some nice color, and I'm trying to get a decent pic to post.

Thanks again to all concerned! Get well, Sasha! Then get back to work! :-0"
-------------------------------------------------------------------------------------------------

Sublithic needs to get a job as a writer for Adult Swim I think. You are fuc*ing funny as hell bro. You made my mouth hurt I was laughing so damn hard. I am doing a bit better by the way and so is the wife. I plan to get back on the torch in the next day or so. Thanks again Sublithic !!!!

Thanks for looking !!!
All my inlines have currentley sold on SYG but I have more coming soon plus some AC's and slides.

[Sasha of PnP Glass]

Here is my first oil dome attempt. It is all 14mm UST joints. I am very happy with it.

My mouth feels mutch better. I still gotta go back soon for the second round of dentistry. And I will be finished with that horrible experience. Stay tuned for more slides, AC's and inlines.

Enjoy !

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/Myfirstoildomeforweb.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/Myfirstoildomeforweb2.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/Myfirstoildomeforweb4.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/Myfirstoildomeforweb3.jpg

Thanks for looking !!

[oldmanmozz]

thanks for keeping ua updated sasha
hope mouth gets better real soon,
keep up the meds :bongin:

cheers beers an cones Mozza :taz:

[TOK3]

Sasha is an up and coming glass blowing badass. I feel like breaking a roor perc .US beaking just so I can get it inlined!

[greenmonster420]

Sasha, I PMed you.

[sm0ke]

Sasha is an up and coming glass blowing badass. I feel like breaking a roor perc .US beaking just so I can get it inlined!

thank god im not the only one wanting to break one lol

[Sasha of PnP Glass]

You guys are awesome. Thank you so much for the words of encouragement. I will do my best.
-Peace

[Sasha of PnP Glass]

Here is the smallest inline I have made to date. It was a custom for a good friend. It is 5 1/2" tall and 4 1/2" wide with a 14mm UST joint and 4 diffusion holes.

Enjoy !

http://i289.photobucket.com/albums/ll205/puffnpass/microinlineforweb7.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/microinlineforweb.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/microinlineforweb4.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/microinlineforweb5.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/microinlineforweb6.jpg

Thanks for looking !

[954zobkid]

nice work bro

[Sasha of PnP Glass]

Here are some more glass in progress shots and general shots of my studio.

Enjoy !

http://i289.photobucket.com/albums/ll205/puffnpass/glassinprogressforweb.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/deskshotsforweb.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/deskshotsforweb5.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/deskshotsforweb4.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/deskshotsforweb3.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/deskshotsforweb2.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/bucketshotsforweb.jpg

Thanks for looking !

[Sasha of PnP Glass]

Here are some shots of the new oil dome being broke in that I just made. Its on a gog bubbler I made in 08'.

Enjoy !

http://i289.photobucket.com/albums/ll205/puffnpass/oildomemilksforweb2.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/oildomemilksforweb.jpg

Thanks for looking !

[minotaur]

That looks fun! :smoke1: Nice craftsmanship

[sm0ke]

you got a sick work place!

[Sasha of PnP Glass]

Here are some milks of the smallest inline I have made to date. It was a custom for a good friend. It is 5 1/2" tall and 4 1/2" wide with a 14mm UST joint and 4 diffusion holes. Pics by Tok3 the happy new owner.
Enjoy!!
http://i289.photobucket.com/albums/ll205/puffnpass/milks/p4030173.jpg



http://i289.photobucket.com/albums/ll205/puffnpass/milks/p4030174.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/milks/p4030175.jpg



http://i289.photobucket.com/albums/ll205/puffnpass/milks/p4030176.jpg
Thanks for looking !!!

[gummybeargun]

that tiny inline is sooo nice sasha! and those rainbow slides you got goin on are insane!

[Sasha of PnP Glass]

that tiny inline is sooo nice sasha! and those rainbow slides you got goin on are insane!

Thnaks bro I appreciate that. It was not easy making it so small. I have two rainbow slides still available. I have them on sale until 4/20 to.
-Peace

[chronicuser1]

hey sasha some awesome glass you got going on there and keep it up. i was wandering if you could make a few ice pinch or disk diffused slides. if you do pm me with the price and pictures. im in the market for two high quality slides preferably one ice pinch the other disk diffused. :cool5:

[Sasha of PnP Glass]

Here are some new gog slides. Two of the slides are available and one is for a custom inline ac im working on. I have been messing around alot with fuming and layering.
Enjoy!
This 18mm slide is available.
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmfumedapslideforweb5.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmfumedapslideforweb3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmfumedapslideforweb6.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmfumedapslideforweb7.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmfumedapslideforweb9.jpg
This 14mm slide is available.
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/amazonbronze14mmslidewithspikefo-3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/amazonbronze14mmslidewithspikeforwe.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/amazonbronze14mmslidewithspikefo-2.jpg
This is for a custom inline ac im about to finish up.
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/apslide18mmwithclrwindomandpaddl-2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/apslide18mmwithclrwindomandpaddl-3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/apslide18mmwithclrwindomandpaddlefo.jpg
Thanks for looking !!

[Sasha of PnP Glass]

Here is the matching Inline ac for my friends Ehle. The slide and diffy also match the Amber Purple Ehle.

Enjoy !

http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/inlineacforCLforweb.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/inlineacforCLforweb2.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/inlineacforCLforweb3.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/inlineacforCLforweb4.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/inlineacforCLforweb5.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/inlineacforCLforweb6.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/inlineacforCLforweb7.jpg

Thanks for looking !!!

[Hennessy1414]

i LOVE your work bro...looks so tasty

one question i have is why dont you make slits on the inline instead of holes :confused:

the slits would attract more people :)

[Sasha of PnP Glass]

i LOVE your work bro...looks so tasty

one question i have is why dont you make slits on the inline instead of holes :confused:

the slits would attract more people :)

Thanks for the props but most of my customers request holes actually. I have the proper tools for slits. The holes are much more personal I guess from a custom point of view. The slits are made by a machine. I think people like the fact I pop all my holes accordingly to thr joint size and chamber space. Its all about function wright?
-Peace

[Sasha of PnP Glass]

I have a couple more avilable slides and a 3pc 18mm available ac coming soon. I gotta mix it up between all these crazy customs.
-Peace

[DaNK]

Sasha could you make me a inline 18mm that will go with my tube. Pics are here...
http://www.fullmeltbubble.com/forum/showthread.php?t=2005

[Sasha of PnP Glass]

Sasha could you make me a inline 18mm that will go with my tube. Pics are here...
http://www.fullmeltbubble.com/forum/showthread.php?t=2005

That would not be a problem at all. I do have a waiting list though for custom work.
-Peace

[Hennessy1414]

Thanks for the props but most of my customers request holes actually. I have the proper tools for slits. The holes are much more personal I guess from a custom point of view. The slits are made by a machine. I think people like the fact I pop all my holes accordingly to thr joint size and chamber space. Its all about function wright?
-Peace
it just seems like the upward directed d-slits on my zach p. mini inline make the hit so smooth and drag free. holes would just seem like it would break up the smoke bubbles less. I have NEVER hit one of your pieces so its hard for me to judge between the two.

~peace

[Sasha of PnP Glass]

it just seems like the upward directed d-slits on my zach p. mini inline make the hit so smooth and drag free. holes would just seem like it would break up the smoke bubbles less. I have NEVER hit one of your pieces so its hard for me to judge between the two.

~peace

To be honest I have used inlines with slits, holes, d-cuts, etc.. Once you go past 6-9 holes or so on a basic inline 14 or 18mm its kinda pointless. You then will get over or under drag depending on whatever type holes you have. The inline is still new to functional glass. People are overly experementing at the moment. But I do see your point. But honestly side by side a inline is an inline. As long as the holes are equal to the dimamater of your gog joint and the air space of the piece itself.
-Peace

[Hennessy1414]

sounds hi-tek so im positive your correct..thanks man it sort of makes sense now :pipe:

[DaNK]

I am cool with the waiting list. Tax time is a bitch. How long is the waiting list and how fast are you to deliver? Could you shoot me some ideas for the inline for my tube. I am looking in the 200.00 range 18mm.

[Sasha of PnP Glass]

I am cool with the waiting list. Tax time is a bitch. How long is the waiting list and how fast are you to deliver? Could you shoot me some ideas for the inline for my tube. I am looking in the 200.00 range 18mm.

My waiting list is two and a half months currentley. I use USPS for regular shipping and Fedex for overnights. My custom inline ac's start at $200.00 by the way. Most of the inline bubbs and ac's I have made are in the $250.00-$400.00 range.

-Peace

[DaNK]

Well fuck man hook a brotha up. Let me know what you can do for 200.00-250-00 I will want the same color work as my tube. I have an 18mm joint and I like holes!

[Sasha of PnP Glass]

Well fuck man hook a brotha up. Let me know what you can do for 200.00-250-00 I will want the same color work as my tube. I have an 18mm joint and I like holes!

Hey bro, Just pm me for the other details. I will put you on the list if you wish.
-Peace

[EEbrew]

But honestly side by side a inline is an inline.
-Peace

your work is nice and I can appreciate it but that comment is farrr from the truth, many members on here would agree with me as well.

[Sasha of PnP Glass]

your work is nice and I can appreciate it but that comment is farrr from the truth, many members on here would agree with me as well.

You took that out of context a bit. I was talking about the fact that the shape of the holes do not affect the hit if they amount to the same size. Size equals drag or lack of drag which equals a good or bad hit. Like I have said before the inline is still a new creation and people are overley experementing on the shape and design. How many inlines have you made and used? Im guessing none. Its funny you said this since your the only person to ever disagree with me on this subject.

[EEbrew]

I don't think it's that new it's been around for years.... I'm only disagree because I have first hand experience and i strive for perfection. I've owned 2 in lines myself and have used 3 others.

[Sasha of PnP Glass]

I don't think it's that new it's been around for years.... I'm only disagree because I have first hand experience and i strive for perfection. I've owned 2 in lines myself and have used 3 others.

I have made and used a lot more then tha bro. Its been out for about two maybe three years now. Thats very new considering glass bubblers have been around for about 15 years. The origonal maker of the Inline is Hops. Im sure their were factors of those inlines you used you never even considered. Your a user not a maker. Your talking about your personal experience with inlines I didnt even make. Im talking about the technical aspects of the inline. Its all math bro.

[EEbrew]

Oh thats cool you've used a lot? then I would figure you'd know better. Pretty sure hops has been making these for about 3 years. Factors with my inline? yeah there were some. like the joint angles on the ac and the tube didn't match up how i'd have liked. the slits weren't perpendicular to the floor and it didn't diffuse perfectly. also mine have about 18 slits I wish it would have had about 12 because then it would have diffused perfect and but at the very least ten slits. Yeah your right I'm the user. I'm the guy who shells out his hard earned money for functional glass art and I'd somewhat like to get what i pay for ( even though the mark up on glass is fucking insane).

I'm talking technical to, bro. I'm sure you know if you have an inline with 6 big ass holes and another with 10 smaller holes the one with 10 will diffuse better.


Remember your in the business of selling art. As the old saying goes the customer is always right ( but we all know that not always the case)

[Hennessy1414]

slitted bongs are all up to how the artist designs the piece....many different factors into what a piece needs.

[ja rasta]

Very very nice work man, is all I can say. I have seen your pieces on some re-sale sites and now I am fully satisfied with knowing you are in the industry, and doing a little bit of re-sale myself i'll probably contact you via email in the near future to handle some business. Peace main

[ja rasta]

Oh and that first black and white inline ashcathcer and the recreation of the roor into the Sashor are nice man, fully...

[Sasha of PnP Glass]

Oh thats cool you've used a lot? then I would figure you'd know better. Pretty sure hops has been making these for about 3 years. Factors with my inline? yeah there were some. like the joint angles on the ac and the tube didn't match up how i'd have liked. the slits weren't perpendicular to the floor and it didn't diffuse perfectly. also mine have about 18 slits I wish it would have had about 12 because then it would have diffused perfect and but at the very least ten slits. Yeah your right I'm the user. I'm the guy who shells out his hard earned money for functional glass art and I'd somewhat like to get what i pay for ( even though the mark up on glass is fucking insane).

I'm talking technical to, bro. I'm sure you know if you have an inline with 6 big ass holes and another with 10 smaller holes the one with 10 will diffuse better.


Remember your in the business of selling art. As the old saying goes the customer is always right ( but we all know that not always the case)


So you answered yourself. The inline you used had over drag. To many holes for the gog joint size. Thats all I was saying in the fist place. Like I said you took my comment out of context. I was correcting you because you were and are now realizing your wrong. And I said Hops had been making them for 2-3 years because he took a year off. And I dont mark my glass up a bit bro. I charge what I should be. The head shops jack the price not us. And you think I need to please you because your a random guy? Im on a two and a half month custom waiting list for people who do want my work. And your still wrong about the 6-10 hole annology. It all depends on the gog size and the air space of the piece. Six holes would be much better on a small inline ac then 10. Ten would cause it to overdrag. I made a micro with 4 holes and the guys who purchased it likes it better then his $1,000.00 tree perced Toro. That says it all.
-Peace

[Sasha of PnP Glass]

slitted bongs are all up to how the artist designs the piece....many different factors into what a piece needs.

Correct sir. Thank you !!!! Somebody understands math besides me. LOL
-Peace

[Sasha of PnP Glass]

Very very nice work man, is all I can say. I have seen your pieces on some re-sale sites and now I am fully satisfied with knowing you are in the industry, and doing a little bit of re-sale myself i'll probably contact you via email in the near future to handle some business. Peace main


Thank you sir. I appreciate that very much.

-Peace

[Hennessy1414]

no problem...you opened my eyes to that fact :)

[amtbps]

Sick work. Question: Do you do palm tree percs? I've got some ideas drawn up...

[Sasha of PnP Glass]

Sick work. Question: Do you do palm tree percs? I've got some ideas drawn up...


Its not something I have had requested or completeted yet. I have had one other person ask for a bubbler with one built in. But I wont get to his for a bit. Im two and a half months behind now because of my dental work. I had to take three weeks off with my infected root canal. You can go ahead and email me your pics.
-Peace

[TOK3]

So you answered yourself. The inline you used had over drag. To many holes for the gog joint size. Thats all I was saying in the fist place. Like I said you took my comment out of context. I was correcting you because you were and are now realizing your wrong. And I said Hops had been making them for 2-3 years because he took a year off. And I dont mark my glass up a bit bro. I charge what I should be. The head shops jack the price not us. And you think I need to please you because your a random guy? Im on a two and a half month custom waiting list for people who do want my work. And your still wrong about the 6-10 hole annology. It all depends on the gog size and the air space of the piece. Six holes would be much better on a small inline ac then 10. Ten would cause it to overdrag. I made a micro with 4 holes and the guys who purchased it likes it better then his $1,000.00 tree perced Toro. That says it all.
-Peace

I am the man Sasha speaks of with the micro inline. I don't know what you are debating about with Sasha as I have not read far enough back.
I will say the inline trumps a lot of smaller pipes I have hit. Amazingly smooth and gives you a great tasting aromatic hit. Sasha is up and coming and will take the scene by storm with the work he has been doing lately. There is more to why his waiting list of work is so long, and its not because of multiple root canals-- it's because people like his work.
There are very few people as humble a man as he, and that says a lot. He cranks out some killer art and keeps himself grounded and is not big headed at all.

[Sasha of PnP Glass]

Some new oil domes. One is 14mm and one is 18mm.
Enjoy !
18mm Oil dome
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmoildomeforweb.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmoildomeforweb3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/18mmoildomeforweb2.jpg
14mm Oil Dome
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/14mmoildomeforweb.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/14mmoildomeforweb2.jpg
I have more slides, ac's, and oil domes to some very soon. I have finally recovered from my dental issues.
Peace - Sasha

[DaNK]

Very nice Sasha. I know the bubble heads will be happy to see that!

[Sasha of PnP Glass]

50mm gog UST jar. This jar was made to match a inline ac ,diffy, and slide set I made for a friends Ehle.
http://i289.photobucket.com/albums/ll205/puffnpass/50mmgogjarforweb.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/50mmgogjarforweb2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/50mmgogfarforweb3.jpg
Its 5 1/2" tall and 2" wide.
Thanks for looking !!

[DCALLSTARR]

can we see a size reference shot man if its not too much trouble? i think that thing is sweet none-the-less ! some amazing work sasha

[Sasha of PnP Glass]

Here is a new 18mm push style amber purple slide.
Enjoy !
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/ap18mmslideforweb2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/ap18mmslideforweb.jpg
Thanks for looking !!

[Sasha of PnP Glass]

can we see a size reference shot man if its not too much trouble? i think that thing is sweet none-the-less ! some amazing work sasha

Its 5 1/2" tall and 2" wide.

[DaNK]

How much for the jar?

[Sasha of PnP Glass]

How much for the jar?

It was a custom for a friend. Its not for sale. Sorry.
-Peace

[DaNK]

Sasha how much for a jar like that one then!

[Sasha of PnP Glass]

Sasha how much for a jar like that one then!

I pmed you bro.
-Peace

[DCALLSTARR]

yah that thing is beautiful sasha. didnt know ground joints were made that big haha.. did you have to custom ground them or can you order joints from glass manufactures that are larger then the 29mm ones? cause that is a great idea i may have to get one made soon when i figure out how my SG is going to be worked.

[Sasha of PnP Glass]

I order them from the company who makes them. Its funn playing with a 50mm gog joint. The seal is amazing.
-Peace

[CrazyToker22]

damn awesome work sasha. everytime i look at that frakenroor i still say wow
and that custom style you have is insane too. LOVE that black and white speckle you did on that custom inline for the steamroller
keep up the SICK wor

[Sasha of PnP Glass]

damn awesome work sasha. everytime i look at that frakenroor i still say wow
and that custom style you have is insane too. LOVE that black and white speckle you did on that custom inline for the steamroller
keep up the SICK wor


Thanks bro I appreicate that very much.
Peace -Sasha

[Sasha of PnP Glass]

3pc. 18mm Ac with 4 hole diffused low profile. It also
has a tini swat style slide with paddle. The doughnut whole is the perfect size for your finger. This piece has a lot of fume work to.
Enjoy !
http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/3pc18mmacforweb2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/3pc18mmacforweb.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/3pc18mmacforweb4.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/3pc18mmacforweb3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/3pc18mmacforweb6.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/glass%20on%20glass%20ac/3pc18mmacforweb5.jpg
Thanks for looking !

[DaNK]

So SICK!!!!!!!!!!!

[Sasha of PnP Glass]

18mm Four hole diffused stemless bubbler. This piece has my SH initials stamped into black silver fumed glass.A ton of silver and gold fume work.
10 1/2" Tall x 9" Long.

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/fourholediffusedstemlessbubblerforw.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/fourholediffusedstemlessbubblerf-3.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/fourholediffusedstemlessbubblerf-8.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/fourholediffusedstemlessbubblerf-7.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/fourholediffusedstemlessbubblerf-4.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/fourholediffusedstemlessbubblerf-5.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/fourholediffusedstemlessbubblerf-1.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/fourholediffusedstemlessbubblerf-2.jpg
Thanks for looking !

[Calp]

You have some of the headiest fuming work I've seen... Your style is really unique.. Keep this up and you'll be at the top of the glass scene soon bro

[DCALLSTARR]

sasha is SOO on my check list of potential new heady glass! im getting more impressed each post

[Sasha of PnP Glass]

Here is a 14mm black and white dome with two nails to
match. I love these UST heavy wall joints.
Enjoy!
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/oildome14mmforweb2.jpg
http://i289.photobucket.com/albums/ll205/puffnpass/slides%20and%20diffusers/oildome14mmforweb.jpg
Thanks for looking !

[Sasha of PnP Glass]

18mm Four hole diffused stemless bubbler with slide. It has a extract dome, two glass nails, a poker/extract tool, extract plate with handle, and the metal stand made by Mack. It has a ton of fume work on it to.
8" long x 7 1/4" tall not including the stand.
Enjoy !

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/orangeandblack18mmstemlessdiffus-5.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/orangeandblack18mmstemlessdiffus-4.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/orangeandblack18mmstemlessdiffus-3.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/orangeandblack18mmstemlessdiffus-1.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/orangeandblack18mmstemlessdiffus-2.jpg

Thanks for looking !

[Sasha of PnP Glass]

I made these videos with my friend Mack. We wanted to show off the functionailty of these two diffused stemless bubblers. They are have 18mm UST joints and have 4 diffusion holes.
Enjoy!

http://vimeo.com/moogaloop.swf?clip_...p;fullscreen=1 (http://vimeo.com/moogaloop.swf?clip_id=4539169&server=vimeo.com&sho w_title=1&show_byline=1&show_portrait=0&color=&ful lscreen=1)

http://vimeo.com/moogaloop.swf?clip_...p;fullscreen=1 (http://vimeo.com/moogaloop.swf?clip_...p;fullscreen=1)

Thanks for looking!
Videos by Mack!

[colitas]

Sasha is the Shiznit that dome is awesome!!
love the fume work too:pipe:

[wpg_jr_breeder]

nice work bud! looks awesome

[Sasha of PnP Glass]

18mm Black and white inline bubbler with 6 diffusion holes. The clear doughnut section is the perfect size for your finger to fit through. The clear kickstand acts like a pistol grip for easy holding of the piece. All 18mm heavy wall UST joints. 10 3/4 Tall x 6" wide.
Enjoy!

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/blackandwhiteinlineforweb.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/blackandwhiteinlineforweb3.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/blackandwhiteinlineforweb4.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/blackandwhiteinlineforweb5.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/blackandwhiteinlineforweb7.jpg

Thanks for looking!

[Calp]

I love the work on that inline.. just saw it on gc

How much it goin for?

[Bongwater420]

nice work man niceee

[undertoker]

Sasha that new bub is sick,and that matching slide is perfect. My favorite piece of all time is the RooR inline. how would you feel about doin and EHLE/lux inline at some point?

[Sasha of PnP Glass]

Sasha that new bub is sick,and that matching slide is perfect. My favorite piece of all time is the RooR inline. how would you feel about doin and EHLE/lux inline at some point?

If I can fit it in the schedule. I dont see why not.

-Peace

[DaNK]

Damn Sasha your tearing it up! How much for that last piece??

[777]

sasha that last inline is amazing! whenever you get those two slides for me let me know thanks 777

[DaNK]

18mm Black and white inline bubbler with 6 diffusion holes is mine. Man this thing is bad ass. Cant wait to get it and milk it!

[JamesDean]

Great work indeed. Keep it up and don't stop innovating. At first I wasn't a huge fan of your color schemes and fuming work, but the more and more I look at it, the more and more I love it. I really can't explain it, but what I can say clearly is that your style might be imitated, but never matched.


schedule

Speaking of schedules, how's my busted Illy doing? Any news? :)

[Sasha of PnP Glass]

Great work indeed. Keep it up and don't stop innovating. At first I wasn't a huge fan of your color schemes and fuming work, but the more and more I look at it, the more and more I love it. I really can't explain it, but what I can say clearly is that your style might be imitated, but never matched.



Speaking of schedules, how's my busted Illy doing? Any news? :)

Thanks for the kind words bro. Its much appreciated. I had a time set back with my wifes health. But I will be catching up very soon hopefully. I have not been on the torch for the last two weeks. Its killing my wallet and my brain. I will keep you updated.

-Peace

[Sasha of PnP Glass]

Sorry I have not posted anything for a while. I have injured my back as well as our AC dying on us in the middle of summer in Florida. I am still doing my best to catch up on my custom work. Its slow going but im getting thr. I have been trying to mostly produce smaller customs because the bigger pieces with all the weight kill my back. I hope to be back to 100% very soon. I am very sorry for the delay to my customers and friends. Its been a ruff last couple months for our family. Between my health and my wife's health.

Here is the last custom piece I made before I hurt my back about a month ago. I ended up selling it because the customer apparantley is now on probation and will not return my emails. Its a 18mm mini inline with cut slits.

http://s289.photobucket.com/albums/ll205/puffnpass/Bubblers/?action=view&current=004.flv[/url ([URL]http://s289.photobucket.com/albums/ll205/puffnpass/Bubblers/?action=view&current=004.flv)]

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/miniinline6.jpg

http://i289.photobucket.com/albums/ll205/puffnpass/Bubblers/miniinline5.jpg

Thanks for looking!!!
Again, My apologies for the delay in my work schedule.

[DCALLSTARR]

The matching work on the mouthpiece and the cap of the inline is amazing sasha!

loving the style, hope your back 100% in the game soon man.

[SheepDawg]

Yah BuuuDy!! Big ups to Sasha!!!

[OrganicOdins420]

I am sorry to hear about your back and family. I wanted to let you know we are all pulling for you and hoping you can get back into the swing of creating more unreal beauties. :smoke1:

[fluxx420]

is that a bent bowl on the steamroller

[Gong Show]

Great Work!! Hope the back feels better soon!!

[Sasha of PnP Glass]

is that a bent bowl on the steamroller

Yes sir it is. It was angled for better viewing for the user.

Thanks for all the kind words and encoragement guys. Unfortunatley I woke up in a ton of pain again today. Its getting really old. Well I guess I am to. Thanks again everyone.

-Peace

[DCALLSTARR]

Seems every glass blower complains about, or has a bad back already. despite most being under 30 years old. I get you, i am not even 25 and i already have terrible back pain from an automobile accident and also, football injuries.

Its such a freakin pain in my ass, literally!

[Sasha of PnP Glass]

Seems every glass blower complains about, or has a bad back already. despite most being under 30 years old. I get you, i am not even 25 and i already have terrible back pain from an automobile accident and also, football injuries.

Its such a freakin pain in my ass, literally!

I feel ya bro. I will be 35 this year. My back has given me issues since I was 17. To much skate boarding, gymnastics, surfing, fighting, snowboarding, etc.. Your early life can be very fun and then kick your ass for the rest of your days. I feel for you DCALLSTARR it only gets worse with age. Most lampworkers do have back, neck, or shoulder issues. Its very pyhsically hard work to do what we do behind a 3000 degree plus torch while standing in the same place for several hours.

I will do my best to get back into action asap.
-Peace

[hyhyz]

sent you a PM about my glass, but besides that amazing work keep up the progress, and PLEASE supply central FL w/some quality glass i hate the 4 hr drive to laughing buddha : / too many coppers on that road

[DCALLSTARR]

but you must agree laughing buddha is THE SHIT!@

love that shop! cx is the man..

and so is Sasha! when are you gonna be pumping out some circulator ashcatchers Sasha?! i would love to see some of your work with a circulator diffuser.

[hyhyz]

Yes Laughing buddah is where it's at, but you can't find glass of that quality unless you want to take a 4 hour drive there then 4 hours back : ((( i love the place every time i goi try to get one thing then the 4 hours back im paranoid the whole time im gonna get pulled over and they're gonna confiscate my glass..... cops (sigh)

[Ripvanwinkle420]

Yes Laughing buddah is where it's at, but you can't find glass of that quality unless you want to take a 4 hour drive there then 4 hours back : ((( i love the place every time i goi try to get one thing then the 4 hours back im paranoid the whole time im gonna get pulled over and they're gonna confiscate my glass..... cops (sigh)

they cant.....unless of course you cristen it on the way home lol

Remember? you bought the bowl to smoke tobacco out off! not weed silly rabbit Bowls are for Bacci!

But no joke ive acually had it happen after pickign up my rasta straight label roor got pulled over and he saw the package...didnt really say anything bout it since he say that i just bought it and theres nothing he can do without resinated glass
Knew he was checking it out though....