PDA

View Full Version : My Collection as of Now.


Chickenhead7
07-04-2009, 06:10 AM
Here is my collection right now...I have had other pieces in the past that have either been broken (RIP) or were stolen so they cannot be here right now :(

Two pieces in my current collection are broken, the only thing holding them together is tape and glue.

My flame polished RooR was broken by some douche that left without telling me that I will probably never see again. It is cracked all the way around the neck, at this point I dont even know if I want to rip it in fear of glass shards grinding off into the smoke. I tapped it a while back and it was working for a while but it finally cracked all the way through.

My Rasta Coil Double Chamber Illadelph was broken by my dumbass, I dropped it in its case when I went to pic it up. It was only about 3 inches from the ground but when it hit the floor the weight of the coil snapped the entire bong in half like a twig, at the joint where the coil goes in...even when it was in the bag.

I glued the Illadelph back together and in these pictures it actually looks quite normal, but believe me it isnt. I havn't hit it yet, just glued it today after letting it sit around broken for 4 months. Hopefully tomorrow it will be dry.

Anyways here is the collection. From Left to right:

Rasta coil Double Chamber Illadelph

Teal/White Label Circ Diffused Toro AC w/ Toro Ice pinch

Orange Label 7/Circ Fixed Stem Toro w/ a random $30 slide

Orange Label 7 Arm Toro AC w/ 18mm to 14mm adapter and slide blown by someone in venice

Crown Label 4 Arm RooR AC w/ another slide by the same venice blower

Mike Fro Custom 5mm Blue Label Beaker Bottom RooR: 4in worked section, colored icepinch, crown mouthpiece with matching colors, and matching Mike Fro tini

Flame Polished 7mm Beaker Bottom RooR with a rasta slide made by the owner of La La Land

http://i587.photobucket.com/albums/ss316/damios_2009/009-1.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/011-1.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/010-2.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/014.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/013.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/012-1.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/015.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/016.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/017.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/018.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/019.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/020.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/021.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/022.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/023.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/024.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/025.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/026.jpg

http://i587.photobucket.com/albums/ss316/damios_2009/027.jpg


Let me know what you guys think about how dumb I am for breaking that beautiful Illadelph...or just what you think about the rest of the collection lol
toalex
07-04-2009, 06:18 AM
Great collection lovin that worked roor section and its mouth piece ahhhhhhhhh :D

but lol did you duct-tape that other roor :P
SteveSmokeyJones
07-04-2009, 06:19 AM
yo bro you got some really kick ass glass!!
Chickenhead7
07-04-2009, 06:33 AM
but lol did you duct-tape that other roor :P

Haha its that tape that has metal in it, so its extra strong...but now the thing is completely crakced through, b4 it wasnt so now the only thing holding it together is the tape. I seriously might just throw it out, I dont think it can be reblown and I dont want to hit it in fear of getting glass dust in the smoke from the crack on the inside. I can hear it grinding when I pick the piece up.
Chickenhead7
07-04-2009, 06:35 AM
yo bro you got some really kick ass glass!!

Thanks man I appreciate it. :)
toalex
07-04-2009, 06:37 AM
Haha its that tape that has metal in it, so its extra strong...but now the thing is completely crakced through, b4 it wasnt so now the only thing holding it together is the tape. I seriously might just throw it out, I dont think it can be reblown and I dont want to hit it in fear of getting glass dust in the smoke from the crack on the inside. I can hear it grinding when I pick the piece up.

Hmmmmmmmmm honestly I'd probably try and have it made into a mini tube so just keep the beaker base and have a blower weld it up maybe even get a perc on her.
I don't know tho throwin it away just seems like a waste to me.

edit: the worked toro top & the slide are so perfect together
Simz
07-06-2009, 06:22 AM
The mike fro is a .de or .us RooR??
Chickenhead7
07-06-2009, 06:47 AM
The mike fro is a .de or .us RooR??

u.s. Roor :)
timmyduboy
07-06-2009, 09:13 AM
the colors on that fro are sick. great combination.
Chickenhead7
07-09-2009, 06:40 AM
the colors on that fro are sick. great combination.

Thanks man, Mike Fro does amazing work!
Higgins
07-09-2009, 06:48 AM
WOW! Crazy collection! I LOVE that blue label!!! FRO is the MAN!
jcreamy420
07-09-2009, 11:00 AM
plz dont get that sick ass stemless to 13 we saw @ WS
Chickenhead7
07-09-2009, 06:39 PM
plz dont get that sick ass stemless to 13 we saw @ WS

Hahahaha.......no im getting it alright :)
Chickenhead7
07-09-2009, 06:40 PM
WOW! Crazy collection! I LOVE that blue label!!! FRO is the MAN!

Thanks :) Heh everybody loves the Fro RooR. Funny I posted it for sale like a month ago and no one wanted it....oh well
dankocalypse
07-12-2009, 01:29 AM
awesome toro and roor
gazstove
07-12-2009, 06:00 PM
dude, I love your illadelph. Is that a dome perc on it? Cuz I never knew illa made dome percs.
Bigsmoker
07-12-2009, 06:50 PM
Even with the broken pieces, That's a beautiful collection.

And you may be able to have the broken RooR turned into and inline.
Chickenhead7
07-16-2009, 04:59 AM
dude, I love your illadelph. Is that a dome perc on it? Cuz I never knew illa made dome percs.

Yeah the dome percs are from their older pieces.
Chickenhead7
07-16-2009, 05:02 AM
And you may be able to have the broken RooR turned into and inline.

Yeah I wish. I already took it in and unfortunately the crack is too close to the label to have it fixed or turned into anything, and the bottom half can't be used because the crack is too close to the ice pinch.
Frosty
07-16-2009, 08:25 PM
Well, if you don't mind having the label a bit messed up and possibly scrapping the ice pinch, I think you could have a pretty sick one of a kind inline Roor there. ;)

...well maybe a Roo, but still sick none the less. :bunny:
Chickenhead7
07-16-2009, 09:23 PM
...well maybe a Roo, but still sick none the less. :bunny:


Lmao.....that would be pretty original.
hyhyz
07-16-2009, 11:25 PM
DAMN i LOVE that orange lab 7 circ... and that worked section if only it had a little bit of shine in it mmm tell me if you ever want to sell that : P
Chickenhead7
07-17-2009, 12:34 AM
DAMN i LOVE that orange lab 7 circ... and that worked section if only it had a little bit of shine in it mmm tell me if you ever want to sell that : P

I was recently considering selling my toro actually....I will let you know if I ever go through with it.