Cleaning 25 micron bag

[organic313]

The first time i used the 25 micron bag the water flowed through quite nicely...

I used cold water and rubbing alcohol after using the bag. It seemed to be pretty clean from my eyes. What is the best way to clean the bags?

Now the second time I used the bag the water was barely dripping through the bottom...

Is this because the bag was clogged or because of the mixture i used? (maybe to much of the leaf going into the mixture)

Thanks in advance for the reply

[Green Supreme]

If you watch this vid you will gain many more tricks than just cleaning the bags. Good luck. Peace GS

http://www.pot-tv.net/archive/shows/pottvshowse-3815.html

[Bubbleman]

Yeah that video that green posted has the jerk and tug method. The 25u screen needs to be cinched at the top, held tightly and lifted in a jerking motion upwards, this will raise the resin off the screen and allow water to flow thru. With this method i can empty a 25u bag in under ten seconds everytime.

Hope that helps.

Peace
Bubble man

[organic313]

10 seconds ?!?!?!?

It took me 40 to an hour to get the water to flow through the 25u screen.

Any suggestions?

[Ellis Dee]

It took me 40 to an hour to get the water to flow through the 25u screen.Same here. Even after cleaning with rubbing alcohol and using the jerk and tug method.

[fizoster]

Nooo with the jerk and tug method it should never take more than a minute or so