PDA

View Full Version : The Monster Mash - Bubba - Burkle - SDXOG



leadsled
05-07-2008, 05:27 AM
Hello everyone. Med patient pretty new to growing. Been putting in alot of time reading and asking questions.

Hope your grows are going well

Here goes the monster mash. Lets see if I can fill the room with BUDS!!

Trying out 2 new strains.

6 plants per 1000 watt, 4000 watts total

tray 1
3 Burkle = Bubba Kush X Purple Erkle
6 Sour Diesel X Og Kush

Other 3 trays: Bubba Kush

Growing in coco coir with 3dorganics nutes and c02.

c02 has been at 1000ppm, just bumped up to 1500 ppm.

Just rehauled my room with new hoods and bulbs
new insulated ducting
sealed room (c02 with ac) during lights on
in out air during lights off

Bird eye view of the room. (ducting is run slightly differently than in floor plan but you get the drift)
http://www.fullmeltbubble.com/gallery/files/2/9/6/4_1000.png

Temp/RH
Top numbers are below they trays on the floor in the dark
Bottom number are on the shelf by the ballasts
78F above the hoods
http://www.fullmeltbubble.com/gallery/files/2/9/6/day3_temp_rh.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day3_MG_4413.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day3_IMG_4440.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day3_IMG_4435.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day3_IMG_4433.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day3_IMG_4430.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day3_IMG_4425.jpg

Thanks

-Lead

Bubbleman
05-07-2008, 05:48 AM
looks great lead, i especialy enjoy your labeling of the photos. very pro indeed.
right down to the post.
i look foreward to following your project,
perhaps right down to the making of the hash...


Bubble man

Elemental
05-07-2008, 06:47 AM
perfect jungle body :)

Full Melt Mafia
05-07-2008, 10:22 AM
This is a real indoor jungle :D

leadsled
05-08-2008, 07:58 PM
looks great lead, i especialy enjoy your labeling of the photos. very pro indeed.
right down to the post.
i look foreward to following your project,
perhaps right down to the making of the hash...


Bubble man

Thanks! I m looking forward to sharing all the way to making the bubble.

I appreciate you and hillbilly's work on this site!!

Your macro photos have been very inspiring to me.

Looking forward to sharing more as I have the time.

-Peace

leadsled
05-08-2008, 07:59 PM
perfect jungle body :)

Thanks !! Appreciate you stopping by

leadsled
05-08-2008, 07:59 PM
This is a real indoor jungle :D

Thank you too!! Appreciate you stopping by and taking a look.

more to come

fullmeltbubble
05-08-2008, 08:02 PM
wooohooo great thread man...your room looks like its running prime...keep up the great work...

leadsled
05-09-2008, 01:44 AM
wooohooo great thread man...your room looks like its running prime...keep up the great work...

Appreciate it very much.

Thanks for stopping by!!

leadsled
05-12-2008, 04:27 AM
Day 11 Flower. Running out of room :)

http://www.fullmeltbubble.com/gallery/files/2/9/6/day11_IMG_4496.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day11_IMG_4485.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day11_IMG_4483.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day11_IMG_4479.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day11_IMG_4477.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day11_IMG_4476.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day11_IMG_4474.jpg

http://www.fullmeltbubble.com/gallery/files/2/9/6/day11_IMG_4471.jpg

Thanks for stopping by.

fullmeltbubble
05-12-2008, 04:42 AM
very cool setup...just so you know...we allow higher res pics on this site than most others...can't wait to see the final product...

sog army
05-12-2008, 05:36 AM
wow.. man.. Im very impressed with how you setup your room. Im sure as you already know alot of work at the beginning means years of easy use.

GROW ON MAN!!!

leadsled
05-13-2008, 08:26 AM
very cool setup...just so you know...we allow higher res pics on this site than most others...can't wait to see the final product...

thanks for the heads up. Allowing more than 5 pics per post also rules!

me too!

thanks for stopping by.

leadsled
05-13-2008, 08:29 AM
wow.. man.. Im very impressed with how you setup your room. Im sure as you already know alot of work at the beginning means years of easy use.

GROW ON MAN!!!

Thanks! its been a lot of research. With a little more $$ I can do everything I want.

Will be more exciting once the buds start forming.

leadsled
05-21-2008, 08:39 AM
dang, I think (and hope) they stopped growing vertically now.

Mis-calculated, plants took off faster than expected.

new hoods being taller didn't help either.

All Part of learning what sizes to run and how much the strains stretch.

Lolly popped em and go rid of the suckers. Still didnt stop em.

Peace



http://www.fullmeltbubble.com/gallery/files/2/9/6/18_1.jpg
http://www.fullmeltbubble.com/gallery/files/2/9/6/18_2.jpg

Sour Diesel X OG Kush http://www.fullmeltbubble.com/gallery/files/2/9/6/18_4.jpg
http://www.fullmeltbubble.com/gallery/files/2/9/6/18_5.jpg
http://www.fullmeltbubble.com/gallery/files/2/9/6/18_6.jpg
http://www.fullmeltbubble.com/gallery/files/2/9/6/18_7.jpg

got some bleaching and heat stress :( http://www.fullmeltbubble.com/gallery/files/2/9/6/18_8.jpg

BiG H3rB Tr3E
05-29-2008, 08:46 PM
I would get to tying them quickly.... or try and drop the height of the trays...other wise you will be frying nugs...

i run my 1k hoods through huge 10"vortex --- i could proly have plants touching glass its soo cooll -- but i still leave a good 20-26" above canopy to make sure all plants recieve equal light...

how long you vegged those for?? they look massive...


nice setup---really seems you put alot of time and research into it... much respects

BiG H3rB Tr3E
05-29-2008, 08:50 PM
are the hoods raised to the ceiling?? cant tell how much room you got above you... but i would get them as high as possible and if thats not enough>>try other two procedures i mentioned in earlier post

leadsled
05-29-2008, 09:18 PM
I would get to tying them quickly.... or try and drop the height of the trays...other wise you will be frying nugs...

i run my 1k hoods through huge 10"vortex --- i could proly have plants touching glass its soo cooll -- but i still leave a good 20-26" above canopy to make sure all plants recieve equal light...

how long you vegged those for?? they look massive...


nice setup---really seems you put alot of time and research into it... much respects

I made alot of mistakes.

Cant drop height of trays. there welded

Also didnt account for height of taller pots. And added height of new hoods.
Didnt expect them to grow so fast.

I have flipped at 24" and been fine.

didnt account for:

taller pots
taller hoods
faster growth

I think I am going to yank em and start over.

Live and learn.

Going to add 2nd exhuast fan for the hoods.

No way to give em enough air circulation.

Thanks for the tip but unfortunately not enough room.

ow 4-5 weeks of veg. Without much c02. 800ppm

With c02 at 1200-1500 ppm I get 2-3 inches of growth a day.

NOW I know can do it in less time.

still learning how to use c02 and properly feed etc.

I agree about light height, even with proper cooling if there too close there buds will get bleached and hurt yield.

I am trying to get the max height and light penetration.

leadsled
05-29-2008, 09:22 PM
are the hoods raised to the ceiling?? cant tell how much room you got above you... but i would get them as high as possible and if thats not enough>>try other two procedures i mentioned in earlier post

yes as high as they can go. even removed the chains and used hoods on hangers as high as they will go.

I am hosed.

On a positive note:

At least I realize this instead of lying to myself and trying to finish in sub par conditions.

Thanks for your suggestions.

BiG H3rB Tr3E
05-29-2008, 09:58 PM
dont rip em!!!! they already this far... give em at least 2-3 wks so they can produce trichs.. at least than you can make som bubble until you can reconfigure the room

BiG H3rB Tr3E
05-29-2008, 10:00 PM
why dont you pull shoots down?? go buy some string.twine.even dental floss will work... and just start pulln every branch down...it will take some time... but not nearly as long as it will to trash the setup and start again all over from veg...

such a beautful setup -- id hate to see it ripped down when its looking soo fine -- you can remedy this situation and i will help you... just let me know how things are going. BhT

cdcl0ne
11-27-2008, 12:08 PM
man just tigh the branches down ..to the table ....bend em over ......wtf ...thats all they need ..a little training .....make them your bitches ...and take control......