PDA

View Full Version : placement of fill and drain



p0sitivemindset
01-08-2010, 12:28 AM
Does the placement of the fill and drain matter on an ebb and flow system?

Green Supreme
01-08-2010, 12:39 AM
Would suggest the table be higher on the fill end and lower on the drain end so it drains. Peace GS

p0sitivemindset
01-08-2010, 01:04 AM
I meant where they would be located in the top tub such as close together or on opposite sides. My bad should have specified.

Green Supreme
01-08-2010, 01:14 AM
Well if one should be higher, I would suggest that would be most effective at opposite ends. Just a thought , good luck. Peace GS

p0sitivemindset
01-10-2010, 11:20 PM
Awesome thats what i was thinking. Thanks GS

pqrs501
02-25-2010, 10:40 PM
Dsquared clothing exporters, suppliers, manufacturers, factories and Distributors related to lacoste Discount clothing. Dsquared Replica (http://www.annywholesale.com/wholesale-Dsquared-cid-190.htm)

p0sitivemindset
03-03-2010, 07:03 PM
^^^^^wtf^^^^^^

CalcioErba2004
03-10-2010, 08:38 PM
The fill and drain should be at the lowest points in a flood and drain. When the pump stops filling it drains too. Usually this is in the middle of the tray. They are usually close together but they don't have to be. Hope this helps.