PDA

View Full Version : Casey Jones F2 FMCD Sift Bubblebox



HerbalToker
12-14-2010, 12:00 PM
I have been making some sift in small personal amounts and getting some pretty decent results i thought id start a spot to share them. To Start.. This is my nicest result im goingto try and take the result to a larger scale, try and collect more.

Casey Jones F2 (seeds by blynx) From my Personal harvest

Loaded
http://i.imgur.com/BWPrG.jpg

Melted
http://i.imgur.com/OoAGS.jpg

Sifted from:
http://i.imgur.com/UbKDA.jpg
http://i.imgur.com/KZTiU.jpg

Puff On Guys

bagseed77
12-14-2010, 12:33 PM
lookin good, anything with casey in it is banging
blynx for the win!!

kushkommander
12-14-2010, 04:51 PM
hell yeah, that sift looks amazing :D ive never sifted CJ but I know it makes some of the best melt ive made to date. keep up the awesome work!

Bubbleman
12-14-2010, 05:08 PM
yeah dude.. really nice sift... love the headie in the bowl....


mmmmmm


Bubble man

HumboldtSmoka420
12-18-2010, 11:04 AM
I have been making some sift in small personal amounts and getting some pretty decent results i thought id start a spot to share them. To Start.. This is my nicest result im goingto try and take the result to a larger scale, try and collect more.

Casey Jones F2 (seeds by blynx) From my Personal harvest

Loaded
http://i.imgur.com/BWPrG.jpg

Melted
http://i.imgur.com/OoAGS.jpg

Sifted from:
http://i.imgur.com/UbKDA.jpg
http://i.imgur.com/KZTiU.jpg

Puff On Guys


Dude that looks like sams sift! How did u make that?

Bubbleman
12-18-2010, 05:29 PM
i think the trick is that he used AWESOME GENETICS and made a very small amount of it... Sam on the other hand can do it with any amounts.. and i've even seen him come up with incredible resin ( clean wise ) from stuff that was lets say a little harder than your usual stuff..to come up with a winner.

Bubble man

HumboldtSmoka420
12-18-2010, 05:37 PM
i think the trick is that he used AWESOME GENETICS and made a very small amount of it... Sam on the other hand can do it with any amounts.. and i've even seen him come up with incredible resin ( clean wise ) from stuff that was lets say a little harder than your usual stuff..to come up with a winner.

Bubble man

Yea but Sam wont share any info, I bet HT will :D

Stokes
12-19-2010, 05:33 PM
That looks like caviar that king's would eat. I just made some clear dome CJ about two weeks ago. Fantastic straight for concentrates! Great work though bro. Seriously mouth-watering.

Juicepuddle
12-20-2010, 07:07 PM
Yea but Sam wont share any info, I bet HT will :D

THIS


Please info on the extraction method! Been wondering when sam's gonna release a patent or something, I just want to know how its done and to try it before I die haha!

HerbalToker
12-20-2010, 09:57 PM
Oh boy, i havent looked at this thread in a while.

SO Basically, im not claiming to have any techinque like skunkman. Like staed my bman, to refine high grade fresh grown resin, from good genetics certainly helps and seemed to play a major factor in my achieving this goodness. I have only yet achieved this with my own homegrown herb, never baged, cured, dried to very dry..

Basically i did this from rolling a few joints over two or three days, and have been doing it alt recently and acheiving matching results. This so far has only come from my CJF2 seeds by Blynx. So if your gunna praise the genetics, hes the guy.

Basically, i held the stalk of the nugs with tweezers while clipping away at the nug, clipping each indivdual branch of each nugs and allowing the smaller nugs to fall onto the screen.
From there once the stem is bare held in the tweezers, toss it aside. continue to with scissors break the remaining product without touching it with your fingers, and without pushing it against the screen AT ALL. Once the herb is busted in the box, using a plastci card i would Without pressing hard on the screen, touch the bottom of the card to the screen, and scoop Once towards myself, picking up the amount of product to stuff a fat paper. and slide itright from the box, into the paper, letting any bits just fall onto the box for next time.

Now i guess you could say good joint rolling technique is required because you cant be picking little bits up off the screen if you can only acheive a half packed loosely rolled joint that will need to be stuffed. All the product must go into the paper, and stay in the paper as much as possible because whatever falls back onto the screen gets pushed to the back corner, Not to be used the next time, Just to sit until i decide to clean the screens and smoke my sift. That way it never adds more contaminant and you conitnue to try and pick it up and drop it.

Next, i scrape my screens into piles, middle screen first. Then lightly, holding the card almost flat with the screen, let the ard run over the sift with just the weight of the card, spreading the sift thin as possible. You will notice your top screen loses about half its yield, because your heads were able to drop down to the next screen. Then i repeat do the same thing on the bottom screen , Spread it out thin as possible, and closely look atit and with the corner of your card, or a pin head, pick out any ttiinnyyy pieces of contaminant and Hope you geta nice result!

Good luck, i know its a basic shitty description but give it a shot.

Ben

HumboldtSmoka420
12-20-2010, 11:16 PM
Told ya he would! HT is awesome! :D

Juicepuddle
12-21-2010, 12:09 AM
Oh boy, i havent looked at this thread in a while.

SO Basically, im not claiming to have any techinque like skunkman. Like staed my bman, to refine high grade fresh grown resin, from good genetics certainly helps and seemed to play a major factor in my achieving this goodness. I have only yet achieved this with my own homegrown herb, never baged, cured, dried to very dry..

Basically i did this from rolling a few joints over two or three days, and have been doing it alt recently and acheiving matching results. This so far has only come from my CJF2 seeds by Blynx. So if your gunna praise the genetics, hes the guy.

Basically, i held the stalk of the nugs with tweezers while clipping away at the nug, clipping each indivdual branch of each nugs and allowing the smaller nugs to fall onto the screen.
From there once the stem is bare held in the tweezers, toss it aside. continue to with scissors break the remaining product without touching it with your fingers, and without pushing it against the screen AT ALL. Once the herb is busted in the box, using a plastci card i would Without pressing hard on the screen, touch the bottom of the card to the screen, and scoop Once towards myself, picking up the amount of product to stuff a fat paper. and slide itright from the box, into the paper, letting any bits just fall onto the box for next time.

Now i guess you could say good joint rolling technique is required because you cant be picking little bits up off the screen if you can only acheive a half packed loosely rolled joint that will need to be stuffed. All the product must go into the paper, and stay in the paper as much as possible because whatever falls back onto the screen gets pushed to the back corner, Not to be used the next time, Just to sit until i decide to clean the screens and smoke my sift. That way it never adds more contaminant and you conitnue to try and pick it up and drop it.

Next, i scrape my screens into piles, middle screen first. Then lightly, holding the card almost flat with the screen, let the ard run over the sift with just the weight of the card, spreading the sift thin as possible. You will notice your top screen loses about half its yield, because your heads were able to drop down to the next screen. Then i repeat do the same thing on the bottom screen , Spread it out thin as possible, and closely look atit and with the corner of your card, or a pin head, pick out any ttiinnyyy pieces of contaminant and Hope you geta nice result!

Good luck, i know its a basic shitty description but give it a shot.

Ben

No thats a great description, I could like see hands doing it! So did the pictures above come from the 3rd screen down, or from the bottom of the box? I read that for bubble boxes the last screen is where the fullmelt goodness is, and that smaller heads and plant mats fall onto the very bottom(not sure if you used a bubblebox or not)

NorCalTrichomePro
07-27-2011, 04:16 AM
Oh boy, i havent looked at this thread in a while.

SO Basically, im not claiming to have any techinque like skunkman. Like staed my bman, to refine high grade fresh grown resin, from good genetics certainly helps and seemed to play a major factor in my achieving this goodness. I have only yet achieved this with my own homegrown herb, never baged, cured, dried to very dry..

Basically i did this from rolling a few joints over two or three days, and have been doing it alt recently and acheiving matching results. This so far has only come from my CJF2 seeds by Blynx. So if your gunna praise the genetics, hes the guy.

Basically, i held the stalk of the nugs with tweezers while clipping away at the nug, clipping each indivdual branch of each nugs and allowing the smaller nugs to fall onto the screen.
From there once the stem is bare held in the tweezers, toss it aside. continue to with scissors break the remaining product without touching it with your fingers, and without pushing it against the screen AT ALL. Once the herb is busted in the box, using a plastci card i would Without pressing hard on the screen, touch the bottom of the card to the screen, and scoop Once towards myself, picking up the amount of product to stuff a fat paper. and slide itright from the box, into the paper, letting any bits just fall onto the box for next time.

Now i guess you could say good joint rolling technique is required because you cant be picking little bits up off the screen if you can only acheive a half packed loosely rolled joint that will need to be stuffed. All the product must go into the paper, and stay in the paper as much as possible because whatever falls back onto the screen gets pushed to the back corner, Not to be used the next time, Just to sit until i decide to clean the screens and smoke my sift. That way it never adds more contaminant and you conitnue to try and pick it up and drop it.

Next, i scrape my screens into piles, middle screen first. Then lightly, holding the card almost flat with the screen, let the ard run over the sift with just the weight of the card, spreading the sift thin as possible. You will notice your top screen loses about half its yield, because your heads were able to drop down to the next screen. Then i repeat do the same thing on the bottom screen , Spread it out thin as possible, and closely look atit and with the corner of your card, or a pin head, pick out any ttiinnyyy pieces of contaminant and Hope you geta nice result!

Good luck, i know its a basic shitty description but give it a shot.

Ben

Multiple sifts = broken stalks/contaminant/leaf/etc.

But yes.. that's how 99% of everyone does it. ;)

Oh, and LOL @ picking out capitate stalks with a friggin' pinhead. haha.

Classic.