PDA

View Full Version : Help Making Soft Hash from Keif



KingChron
05-19-2011, 01:51 AM
Hi all, first off id like to say this site is a godsend, ive soaked so much up in my time viewing.

And I'm hoping you guys can provide some insight here.

I'm trying to make some nice soft hash from dry sift.

I saw bubbleman's thread on his "turkish method", wich seemed to produce a nice product,had good sheen and seemed malleable(as for the rest id have to test it myself).

I'm wondering if any1 knows any other ways to practically make or press a nice malleable blonde or black hash(practical as in i mean no one really wants to hand rub a pound or more of hash ect...not practical lol)

any help is greatly appreciated

Green Supreme
05-19-2011, 02:01 AM
I would try the method you mentioned. If you have good quality powder the pressed product will be hard at room temp and malleable when body heat is applied. Peace GS

KingChron
05-19-2011, 02:58 AM
thanks GS, just wasnt sure if there were other ways achieve a simmilar end product using a press to process bigger amounts at a time or if its possible to process bigger blocks with the aforementioned teq above

Green Supreme
05-19-2011, 03:08 AM
Jack presses and vices work. Peace GS

KingChron
05-19-2011, 10:45 AM
Hey Gs appreciate the quick replies,

Ive tried vises and presses before but it always comes out a hard block of pressed kief similar to ftw's brick in this thread http://www.fullmeltbubble.com/forum/showthread.php?t=118&highlight=hash+press

im more interested in a malleable/soft hash and was wondering if there was a way to achieve this using a press or vise.

main reason y im interested in using a press is so i can process larger slabs(100g or more) effiecently

but by all means if u know another way to process slabs like that of soft malleable hash without a press im open to any ideas, especially from a fellow canadian :)

thanks King

AlexParadis
05-19-2011, 01:49 PM
KingChron curing can soften a piece of hashish .

CalcioErba2004
05-19-2011, 05:10 PM
It seems to me you are looking for cream or charas...

KingChron
05-19-2011, 05:28 PM
APthats very interesting i knew that it would darken it due to oxidization but i did not know it would soften over curing.

Calcio, i've collected charas before although very good it can be quite tedious to get a reasonable amount, looking for more of an afghani or leb goldseal type consistency

as i stated above, i liked bubbleman's "turkish" method but i was trying to find other methods to produce a nice malleable hashish similar to afgani or goldseal or even a soft morrocan blonde

Green Supreme
05-19-2011, 05:57 PM
It's the quality of the powder that makes it malleable, not the method. Peace GS

AlexParadis
05-19-2011, 09:12 PM
if you want to press a lot of kief put it in your 25 mc bag then wash it, after let it dry in one flat block. this block will be easier to press.

KingChron
05-20-2011, 12:50 AM
hey gs, i know the quality of the keif plays a major role in the finished product but there are so many types and variations of hashish i know the methods have to play some part in that

and thanks AP but i dont have bubble bags ill be doing dry sift

AlexParadis
05-20-2011, 01:21 AM
then you want a press call "piecemaker" , its easy to find in google and deliver at home. its good for making big piece and it take less time just finish to press by hand and add little heat to help for decarboxylation . let cure inside a wooden box, little under room temp and each day press your hash . this way your hash will always end soft.(sorry my english is poor)

KingChron
06-26-2011, 11:50 PM
Hi, Thanks ap, i have looked at the piece maker but like i stated before im looking to make larger quantaties at a time... not a couple grams. With continued research I found want im looking for, a method that is capable of doing this producing a nice soft malleable hash.

let me know what you guys think.
YouTube - ‪Hash making‬‏