What's everybody's best method to clean percs? They're always such a bitch to get spotless, I feel like no matter how much grunge off one uses on them, there is almost always atleast a thin layer of scum left on them. Fucking A.
Printable View
What's everybody's best method to clean percs? They're always such a bitch to get spotless, I feel like no matter how much grunge off one uses on them, there is almost always atleast a thin layer of scum left on them. Fucking A.
I use 99% isopropyl alcohol and table salt combined with a lot of shaking.
Ok man, I had the same prob. for a long time. There would always be this thin ass layer of discolor inside the perc chamber. I tried everything, hot water, iso, different salts ect. Finally I saw on TC that someone had used oxyclean and worked. Sure
So just fillup you tube full with hot water, plug up the hole with stopper, dump in a scoop of oxy and let it do it's thing. The longer you let it just sit and shake it around every once in a while, the better the product works and will just lossen everything in the tube off. Then I just run mass hot water and then cold water.Works like a charm everytime. Let it sit for and hour or so if you can. Hope this helps!:)
Those really thin layers come off as skin like layers sometimes, it's looks really gross but then again your tube is spotless and nothing looks more gross than a dirty ass bong!
So far I've blown threw a bottle of Grunge Off and two bottles of iso propo and countless amounts of salt... but oxyclean, now that seems like a solution that I never thought of. Thanks everybody. Bong scum is fucking gross
Heat up the iso on the stove it works 1000% better just be careful, apparently that stuff is flammable.
What is the word on using Oxyclean to clean?
ISO WILL BLOW UP IF HEATED TO LONG.
ISO has a VERY LOW BOILING POINT so be EXTREMELY careful when heating it.
I have a 7-13 arm toro and I use Grunge off super soak. It comes in the black bottle. takes less than 10 minutes and its like new again. The key is not going too long in between cleanings. peace, hope this works out for you!
yea heating iso is dangerous. id personally prefer to stay away from that method if there are other alternatives. i remember hearing oxyclean works well, buti also remember ppl saying there was a down side to it...im not sure what it was tho. does oxyclean make your labels rub off or something? maybe im wrong..
Thats the sort of information I'm looking for.Quote:
Originally Posted by dutchmastakilla
Grunge off.
just got a box of it today, going to do a little photo essay for you all here. on a very dirty gravity bong i have .( hasnt been cleaned in almost five years
Will have it up soon
Bubble man
Here is a new product that works great. This is a great product to take on vacation, it is very hard to get good alcohol in other countries and this makes cleaning you piece very easy in any part of the world. Alot cheaper in shipping costs also.
http://www.shazzamcleaner.com/index.php
Aqua Lab Tech
sweet, glad to hear u finally got the GO bman! let me know what you think
grunge off super soaker in the black bottle will get ever stain off if you let it sit...pour a bottle in at night before you go to sleep and let it sit and in the morning your tube will be clean as new
I think the problem with the OP is that hes forgetting an important step to rinse with some white vinegar after you have used your cleaning solution.( iso/salt or GO). This should take care of any film or cloudy residue left over (mostly hard water stains). Give it a try I guarentee once you try white vinegar you will never clean your tube without it again. It really makes a huge difference. Try it out. And as for percs, I never recommend shaking a tree perc, invest in some grunge off. And for the white vinegar, just roll it around in the tube for a couple minutes. Works wonders.
The word is Oxygen
white vinegar huh? i think i'll def try that then, along with the trusty iso + salt. thanks for the tip! ill post later on to report my results too
I've been told the heavy-duty cleaning agent called CLR will remove all hard water stains and resin remnants too, but it will also take labels off of glass, so its not always the best option, but it might work for yer percs.
I've never even heard of the white vinegar trick, it seems that everyone has their own tricks. I've been a big fan of grunge off as well as the iso/salt trick. Even the heated Iso. But those fucking percs still got this layer of scum on them. It's not hard water stains, it's just bong scum. I'm gonna get some oxyclean and see what that does.
govegan - have u tried the white vinegar trick yet though? if white vinegar works too, then i would probably prefer to try the white vinegar before trying the oxyclean. just for the fact that it is more natural, or at least edible and wont kill me, and that vinegar is probably cheaper too. oh yea, and u can cook up some marvelous shit with it. either way, let us know how it goes
will do, will the vinegar work on more than just hard water stains, it's just the thinnest layer of scum that won't go away. no chunks of res, just perc scum.
To whoever asked about heating ISO:
since the boiling point of iso is far less than 212 F, its very simple to attain a rolling boil using a microwave for ~30-45 seconds. This method does not expose flammable vapors to open flame, and is as safe as heating anything else.
A word of caution: The vapors that boiling alcohol give off are POTENT. I've gotten whiffs before that have made my head spin, so make sure you rinse the entire tube/glass peice out thoroughly before use. Theres nothing more unpleasant than breathing iso-flavored air from an improperly rinsed tube.
Billy Mays is tha tits!
Look for Bubbleman's sticky thread about the latest product he is carrying, Grunge Off. Sounds like amazing stuff and exactly what you are looking for.
You can use CLR or a Calicium Remover, like Cal-X to remove those hard water stains that alcohol will not even remove.Quote:
Originally Posted by YukonBikerGuy
Aqua Lab Tech
yo have you died yet? ill trust you if u havent diedQuote:
Originally Posted by eastghost
hahah, not dead yet. Ill post a video at some point to show that im not lying.
I'll vouch for microwaving iso. I do it all the time to speed up the evaporation. I run a plate of it for about 3.5 minutes.
And has anyone figured out what the downside to Oxyclean is yet?
Microwave trick is the shit but i blame that on a broken perc so i would really only recommend it for thick glass
really? i never heard of anything like that, it would seem to me that borosilicate glass should easily withstand the boiling temperature of alcohol (82.3 Degrees C, 180.14 degrees F). what kind of tube was it?
If you're going to boil ISO, maybe you should run hot water through it for a while before you do. Only reason i'd see one breaking is due to a temp change.
It was a Roor, a US Roor, but Roor none the less. I run hot water through it, ten salt and iso first, then rinse, then boiling iso, I didn't see it break, but I cleaned it put it away took it out the next day.... broken perc. shitty shit son
I hope you didn't shake it around too much^^
to get the iso warm just put it in a bottle and run the bottom part of the bottle (where the iso is) thru hot water...the heat transfers into the bottle and its below boiling temps...there ya go problem solved
also..fuck iso and all that bullshit...white vinegar DOES make you shit sparkle..but fuck all these solvents and get Grunge Off...no more dealing with bullshit solvents
I've also dug on ISO/Salt until I came across Grunge Off, shits awesome. I need some of the Super Soaker, they only have the powder grunge off at the headshop near me, but that shit is still awesome. Why would shaking fuck up a perc? I kinda figured if it was all one piece there is nothing for the perc to smash into and what not
THere are some crazy bath salts that work magic with 90%+ iso
pick them up at bed bath and beyond or a soap store, they're really big and from the ocean and work way better than table salt
grunge off super soak beats all those other solvent based bullshit cleaners. Just try the shit and you will see for yourself that iso and salt and vinegar are cleaners of the past. Wise up people and listen to your peers. They are telling you what works!
i didnt bother even reading this whole thread .. so sorry if sumone else has already said this ...
But the best thing to do .. IS NOT LET YOUR PERCS GET THAT DIRTY !!!!!!
ALWAYS KEEP YOUR GLASS LOOKING BRAND NEW, then youll never have the problem of dirty scum blacky shit that permanitly will be there ;)
heard they can scratch your tube. Dont use anything but table salts. Although, i dont know from personal experience, but i aint risking it.Quote:
Originally Posted by KaptainKhronik