Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: 1st run no melt

  1. #1
    Join Date
    Jan 2011
    Posts
    6

    Default 1st run no melt

    I did my first run for bubblehash with an 8 bag bubblebag set with a 5gal washer. I used wet trim mostly fan leaves and got a decent return although it was green. I could not get any melt at all though. I used some nice sugary grandaddy to start with. The water was so cold on the second run it was smoking with cold fog. I'm thinking maby there was too much contaminates? The hash didn't come out looking right after it dried it was more powdery instead of having that melty look to it. I looked at the stuff under a magnifier and its looks great but it just won't melt. I wanted to ask for advice before I do a good batch

  2. #2
    Join Date
    Nov 2007
    Posts
    1,625

    Default

    Well.. sometimes the quality of the resin head is just not there.. It really depends on how it was grown and wether or not the grower understood the need to allow the trichome head to mature.. This means allowing the oils to mature and the wax membrane to thin out. The thicker this membrane is.. the less likely you are to get a melty bubble.
    If your ratio of Volatile oils is high that is where you are most likely to get the MELT>
    the melting affect is the volatile oils bubbling and melting out of the hash.

    Also using wet trim.. if you over mix it can lower your quality depending on the material you started with.
    Feel free to come into live chat and ask use questions live next time you run a batch..
    Good luck and may the fullmelt bless your bowl sooner than later

    peace
    Bubble man

  3. #3
    Join Date
    Dec 2009
    Location
    -->HERE
    Posts
    32

    Default

    Quote Originally Posted by Bubbleman View Post
    This means allowing the oils to mature and the wax membrane to thin out. The thicker this membrane is.. the less likely you are to get a melty bubble.
    Once your trichomes begin to turn amber, does that also mean the wax membranes have thinned out and the oils matured? I'm gettin ready to harvest one of my little guys and want to ensure bubbly goodness. Gracias very much

  4. #4
    Join Date
    Feb 2011
    Location
    In the mountains
    Posts
    9

    Default

    Use the good frosty buds and trim... Then pull apart the buds or chop em up! Very important!
    Then mix for at least one hour stopping 3-4 times to wait 10 mins to let settle.
    Enjoi

  5. #5

    Default

    ^^^ One hour is way too long to mix.

    I mix by hand for 15 minutes at most, then settle for 20 (I have a 1 gallon kit)
    Last edited by TheTrichomeKid; 02-19-2011 at 02:03 AM.

  6. #6
    Join Date
    Feb 2011
    Location
    In the mountains
    Posts
    9

    Default

    Get an electric mixer, works better, oYo

  7. #7
    Join Date
    Jan 2011
    Posts
    6

    Default

    I ran my 5gal washer for 10 and 15 mins I think it was overkill. Also the bag opened in the washer by itsself so I know the second batch had contamination

  8. #8
    Join Date
    Jul 2010
    Location
    Humboldt County, CA
    Posts
    222

    Default

    screw electric mixer unless u meant Bubblenow XL
    S.B. 420 & Prop 215 compliant
    Please check out my website at: themadhasher.com

  9. #9
    Join Date
    Feb 2011
    Location
    In the mountains
    Posts
    9

    Default

    Bubble now xl. Looks fancy! I was looking into those washers too. I bet it's very gentle on the triches! Nice. I say longer because when I do mix for less time and i take out the material I can still see trichomes. My thought is longer colder mix and for the most part all the triches will be off, IMHO.

  10. #10
    Join Date
    Feb 2011
    Location
    In the mountains
    Posts
    9

    Default

    Ok it's not really my technique I ripped it off of the pollinator in Amsterdam that's how milla does hers. just my . O two
    Peace
    Last edited by Bon qualite; 02-20-2011 at 12:09 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •