Trim from trimmers

[Johnnyrex]

Hello everyone I'm new to this forum I am going to harvest this week and its about 5 lbs now the question is I have no help trimming by hand also I work a regular 9-5 job I own a spin pro trimmer can I use the trimming from the spin pro to make full melt?

[Johnnyrex]

Has anybody ever used trimming from trim machine I was reading someone started a thread but it only had a couple of post can it be done with with good results or will it turn out green and will not melt?

[Bubbleman]

I have used the SpinPro trim to make bubble and it turned out great.. its the reason we actualy sell spinpro's > While the majority of the other trimmers out there use blades and vaccums this is a big no no for the end product. The spinpro uses a small wire to snip the tiny trim leaves from their buds..
Good luck and let us know how it turns out for you

Peace
Bubble man

[Johnnyrex]

I have used the SpinPro trim to make bubble and it turned out great.. its the reason we actualy sell spinpro's > While the majority of the other trimmers out there use blades and vaccums this is a big no no for the end product. The spinpro uses a small wire to snip the tiny trim leaves from their buds..
Good luck and let us know how it turns out for you

Peace
Bubble man

Thanks bubble man for the quick reply I actually have the the one with the clear top that you can see through it don't know right now who makes it. Also it comes with a single metal blade and 2 sets of wires in form of an X so you recommend me using the wire instead of the single blade?

[Johnnyrex]

Ok we'll I'm done trimming I think the trim from the spinner kind of ground my trim up I really don't know I'm new to making bubble I have made it 2x before with a 3 bag that a friend gave me it was 220, 73, 25 it turns out green and crapy doesn't bubble and taste horrible. I just purchase an 8 bag kit so hope this time it will be the bomb hope to get full melt or at least bubble. Here is the pics of the trim I put in the freezer. Thanks everyone

[Johnnyrex]

It seem that I can only upload 1 picture at a time well here's another lol

[Johnnyrex]

Anybody feel to comment on my trim how does it look also drying the hash is it like bud 65-70F and RH 50-60% also does one cure full melt or only bubble or both? Thanks

[Johnnyrex]

Well I am going to update this thread my bubble bags came in yesterday came in 5 gallon 8 bag so I did my first run I don't know should I be disappointed I hand mixed for 10min with wooden spoon let it sit for 20min than mix again for 5min I didn't see hardly any foam and went I drained my first work bag 220 it was very green so here are some pic of the different bags. Let me know oh I ran 200gr of trim frozen I trim with sprin pro let me know of its good or should I be disappointed thanks

[Johnnyrex]

One more pic

[Johnnyrex]

Last one let me know what you think